Wiki source code of LT550D - Automatischer Start nach Stromausfall

Last modified by rangee rangee on 2021/10/01 11:00

version	line-number	content
17.1	1	If you want a LT550D to start automatically after a Power Failure, you can follow this Steps:
8.1	2
	3	(% style="list-style-type:square" %)
17.1	4	* Turn of your Device
	5	* Power On your device and enter the Bios by pressing the {{status title="DEL"/}} Key
	6	* Use your Arrow Keys to open "Chipset" and there choose "South Bridge".
	7	* Set "System Start after Power Failure" to:
8.1	8	(% style="list-style-type:square" %)
17.1	9	** "Always on" → The Device starts always when connected to the Power Line
	10	** "Former State" → The Device will only start, if it was powered On before the Power Failure
	11	** "Always Off" → The Device will never start automatically
	12	* Save your Settings with the "F4"->Key → "Yes"
8.1	13
13.1	14	(% style="width:971px" %)
	15	\|(% style="width:319px" %){{lightbox image="20190920_081929.jpg" group="1" width="300"/}}\|(% style="width:318px" %){{lightbox image="20190920_081942.jpg" width="300" group="1"/}}\|(% style="width:331px" %){{lightbox image="20190920_081951.jpg" width="300" group="1"/}}
8.1	16
13.1	17

Featured