LT550D - Start automatic after Power failure
Last modified by rangee rangee on 2021/10/01 11:00
If you want a LT550D to start automatically after a Power Failure, you can follow this Steps:
- Turn of your Device
- Power On your device and enter the Bios by pressing the DEL Key
- Use your Arrow Keys to open "Chipset" and there choose "South Bridge".
- Set "System Start after Power Failure" to:
- "Always on" → The Device starts always when connected to the Power Line
- "Former State" → The Device will only start, if it was powered On before the Power Failure
- "Always Off" → The Device will never start automatically
- Save your Settings with the "F4"->Key → "Yes"