Wiki source code of TCMS (RangeeOS) - Bereitstellung als virtuelle Maschine (VM)
Last modified by Tobias Wintrich on 2024/04/16 10:38
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
60.1 | 1 | This HowTo describes how to install RangeeOS in a virtual environment as a VM. |
| |
14.4 | 2 | |
| |
60.1 | 3 | **Estimated time required:** Approximately 10 minutes after downloading the image. |
| |
14.4 | 4 | |
| |
32.1 | 5 | {{toc/}} |
| 6 | |||
| |
60.1 | 7 | = Step 1 - Downloading the ISO image = |
| |
14.4 | 8 | |
| |
60.1 | 9 | The ISO file for installing RangeeOS or TCMS is available upon request from Rangee Support - please send an inquiry to support@rangee.com. |
| |
14.4 | 10 | |
| |
60.1 | 11 | In order for us to provide you with a customized download link for the appropriate ISO file, please include the following minimum information in the email: |
| |
14.4 | 12 | |
| |
60.1 | 13 | * Your company name |
| 14 | * For TCMS, additional information on where you purchased your device with RangeeOS | ||
| |
58.1 | 15 | |
| |
60.1 | 16 | = Step 2 - Provisioning the ISO file = |
| |
14.4 | 17 | |
| |
60.1 | 18 | For installation on VMware vSphere, Microsoft Hyper-V, or Proxmox VE, you can find instructions for creating the virtual machine here: |
| |
14.4 | 19 | |
| |
43.1 | 20 | * [[TCMS - Installation auf ESXi>>doc:HowTos.TCMS - Installation auf VMware vSphere.WebHome]] |
| |
31.1 | 21 | * [[TCMS - Installation auf Hyper-V>>doc:HowTos.TCMS - Installation auf Hyper-V.WebHome]] |
| |
60.1 | 22 | * [[TCMS - Installation auf Proxmox VE>>doc:HowTos.TCMS - Installation auf Proxmox VE.WebHome]] |
| |
14.4 | 23 | |
| |
60.1 | 24 | Installation is also supported on almost all other hypervisors. The VM requires the following minimum requirements: |
| |
14.4 | 25 | |
| |
58.1 | 26 | * Min. 2 vCPU |
| |
31.1 | 27 | * Min. 4GB RAM |
| |
58.1 | 28 | * HDD: |
| |
60.1 | 29 | ** SATA or IDE disk mode |
| 30 | ** (RangeeOS) min. 8GB HDD, 32GB if Fastboot is to be used | ||
| 31 | ** (TCMS) Min. 8GB HDD, 32GB recommended | ||
| |
14.4 | 32 | |
| |
60.1 | 33 | If you want to install RangeeOS / TCMS on hardware, you can transfer the ISO file to a USB stick using tools such as Rufus, Unetbooting, or similar. See more about this here: |
| 34 | [[RangeeOS - Installation von einem USB-Stick>>doc:HowTos.USB-Installer.WebHome]] | ||
| |
14.4 | 35 | |
| |
60.1 | 36 | = Step 3 – Installation = |
| |
14.4 | 37 | |
| |
60.1 | 38 | 1. Boot from the ISO file and select the '**RangeeOS Installer**'((( |
| |
36.1 | 39 | ((( |
| 40 | ((( | ||
| |
38.1 | 41 | {{lightbox image="image2021-4-30_8-25-54.png" width="500" group="1"/}} |
| |
36.1 | 42 | ))) |
| 43 | ))) | ||
| 44 | ))) | ||
| |
60.1 | 45 | 1. Select '**Install RangeeOS**' and confirm the proposed disk (usually /dev/sda) for installation.((( |
| |
36.1 | 46 | (% style="width:1060px" %) |
| |
39.1 | 47 | |(% style="width:523px" %){{lightbox image="image2021-4-30_8-27-50.png" width="500" group="1"/}}|(% style="width:533px" %){{lightbox image="image2021-4-30_8-28-14.png" width="500" group="1"/}} |
| |
36.1 | 48 | ))) |
| |
60.1 | 49 | 1. Wait until the installation is complete. Text characters appearing during the installation process can be ignored.((( |
| |
37.1 | 50 | (% style="width:1061px" %) |
| 51 | |(% style="width:529px" %){{lightbox image="image2021-4-30_8-29-19.png" width="500" group="1"/}}|(% style="width:529px" %){{lightbox image="image2021-4-30_8-30-13.png" width="500" group="1"/}} | ||
| 52 | ))) | ||
| |
60.1 | 53 | 1. Finally, select 'Reboot' and confirm that the CD-ROM drive has been ejected.((( |
| |
37.1 | 54 | (% style="width:1046px" %) |
| 55 | |(% style="width:517px" %){{lightbox image="image2021-4-30_8-31-12.png" width="500" group="1"/}}|(% style="width:526px" %){{lightbox image="image2021-4-30_8-31-30.png" width="500" group="1"/}} | ||
| 56 | ))) | ||
| |
60.1 | 57 | 1. The VM will then start into a "**Pre Setup Wizard**".{{lightbox image="image2021-4-30_8-32-42.png" width="500" group="1"/}} |
| |
14.4 | 58 | |
| |
60.1 | 59 | = Step 4 – Pre Setup Wizard = |
| |
14.4 | 60 | |
| |
60.1 | 61 | Upon the first boot of a newly installed RangeeOS (also TCMS), various device data will be requested: |
| |
14.4 | 62 | |
| 63 | * Unit Type | ||
| |
60.1 | 64 | * Serial number |
| |
14.4 | 65 | |
| |
60.1 | 66 | These data can be freely chosen and do not have any license-related background. They can be read later via the TCMS Kommbox. |
| |
14.4 | 67 | |
| |
60.1 | 68 | After entering the data, TCMS automatically attempts to retrieve a license and then shuts down automatically. The installation is now complete. |
| |
14.4 | 69 | |
| |
40.1 | 70 | (% style="width:1550px" %) |
| |
41.1 | 71 | |(% style="width:528px" %){{lightbox image="image2021-4-30_8-39-31.png" width="500" group="1"/}}|(% style="width:521px" %){{lightbox image="image2021-4-30_8-39-51.png" width="500" group="1"/}}|(% style="width:500px" %){{lightbox image="image2021-4-30_8-40-25.png" width="500" group="1"/}} |
| |
14.4 | 72 | |
| |
60.1 | 73 | = Step 5 - Next Steps = |
| |
40.1 | 74 | |
| |
60.1 | 75 | All further details regarding the use of RangeeOS can be found in our [[RangeeOS Manual>>doc:Handbuecher.Handbuch11.WebHome]]. |
| |
14.4 | 76 | |
| |
60.1 | 77 | All further details regarding the use of TCMS can be found in our [[TCMS Manual>>doc:Handbuecher.TCMS11\.00.WebHome]]. |
| |
34.1 | 78 | |
| |
60.1 | 79 | = Note = |
| |
57.2 | 80 | |
| |
60.1 | 81 | The entire management interface of RangeeOS as well as TCMS is web-based and can be accessed with any browser. |
| |
34.1 | 82 | |
| |
60.1 | 83 | Simply open the page '**https:~/~/%IP or hostname of the OS%**' for Kommbox or '**https:~/~/%IP or hostname of the OS%/tcms**' for TCMS. |