Wiki source code of RangeeOS - Installation von einem USB-Stick
Last modified by rangee rangee on 2021/09/28 09:35
Show last authors
author | version | line-number | content |
---|---|---|---|
1 | This Howto describes, how you can perform a new installation of the Rangee OS with a USB-Stick. | ||
2 | |||
3 | This can be used, if you only buy a Rangee OS license or if you have to reinstall a device after a faulty update. | ||
4 | |||
5 | First of all you need the installation-ISO-file - you will get this from our technical support on request in form of a direct download link. | ||
6 | |||
7 | Additionally you need the tool **rufus**, for which you will also get a download link. | ||
8 | |||
9 | |||
10 | = __**Step 1 - Deploy a USB flash drive:**__ = | ||
11 | |||
12 | First you should format your USB stick with the file system Fat32. In Windows, you need to right-click on your USB stick and select Format... Select FAT32 (default) at "File System:" and check Quick Formatting. | ||
13 | |||
14 | Attention: this will delete all data on the USB stick! | ||
15 | |||
16 | Download the ISO file and rufus from the Rangee Update Server. | ||
17 | |||
18 | Insert the USB-Stick into a Windows Desktop/Laptop and start rufus . Under Image, select the downloaded ISO-file and under Drive your USB-Stick - then click OK. When the process is complete, you can safely eject the USB stick. | ||
19 | |||
20 | = __**Step 2 - Installation on the Thin Client:**__ = | ||
21 | |||
22 | Plug the USB stick into your Thin Client and start it. Press the key for the boot menu or for BIOS directly and repeatedly during startup - the keys vary by device and are usually set to {{status title="Del"/}}, {{status title="F2"/}}, {{status title="ESC"/}}, {{status title="F9"/}}, {{status title="F11"/}} and {{status title="F12"/}}. | ||
23 | |||
24 | Boot from your USB stick, click on "Install Rangee OS" in the selection dialogs and confirm the dialogs". | ||
25 | |||
26 | After the installation you have to reboot the machine using the option "Reboot" in the selection dialog. | ||
27 | |||
28 | After the reboot you will be asked to enter a serial number and a device type - these queries have to be filled in - but what you enter doesn't matter, because the entries are only for easier identification if a TCMS is used. | ||
29 | |||
30 | = __**Step 3 - Initial setup:**__ = | ||
31 | |||
32 | After restarting, the initial installation is pending - here you can already make network settings and create connections. After you have finished the initial setup, the Thin Client will restart - all further settings can be made via the kommbox, which has the default user "administrator" and the password "engels" preset. | ||
33 | |||
34 | In case of problems and/or questions you can of course contact the Rangee Support Team - either via the support form or via an e-mail inquiry to [[support@rangee.com>>path:mailto:support@rangee.com]]. |