Skip to Content

Docusnap - Configuration

Last modified by Tobias Wintrich on 2026/03/10 12:36

For RangeeOS, a software module for inventory management with Docusnap is available. The module is capable of automatically generating a hardware report and storing it on any network drive. From there, the reports can be processed by a Docusnap server.

This article was created and tested with the following software versions:

  • Firmware 13.00 Build 175
  • Docusnap 1.07-x64 – 13.00 Build 005

The Docusnap module is not available with a standard update server access. For free activation, please contact our support team (support@rangee.com).

Setting up a Network Drive

The setup of a network drive for the automatic report is described here:
RangeeOS Manual - Drives

Configuration

After installation, you can find the module configuration under Connections & Applications → Docusnap.

The following options are available:

Automatic Scan

ParameterDescriptionDefault
Automatically scan on bootIf this option is enabled, a report is automatically created at startup and stored on the configured network drive.disabled
Autostart delay [sec]This option allows delaying the creation of the report by the specified number of seconds.0
Drive for scan resultHere you can define the drive where the report should be stored. 

Manual Scan

Scan resultThe result of a manual scan is displayed in this text field. 
Scan nowClicking the Scan button immediately creates a report. The result is displayed in the Scan result text field. 
Scan now and download XMLClicking the Scan & Download button immediately creates a report and offers it as an XML file for download.disabled
Do not apply TCMS settingsIf enabled, the client ignores the drive settings transmitted by TCMS.disabled