Skip to Content
Last modified by rangee rangee on 2021/10/08 15:50
From version 8.1
edited by rangee rangee
on 2021/10/04 11:20
Change comment: Renamed back-links.
To version 3.1
edited by rangee rangee
on 2021/09/27 14:54
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -49,7 +49,7 @@
49 49  
50 50  Here you can setup any screen connected to this Thin Client.
51 51  
52 -==== Basic configuration ====
52 +Basic configuration
53 53  
54 54  **Configuration method:** allows you to specify the degree of complexity and depth for the screen configuration, so it suits your level of expertise.
55 55  Please note that this setting has an effect on what settings will be displayed. Settings that are listed in this documentation but not displayed in the configuration screen are probably not being displayed, due to your chosen configuration method.
... ... @@ -73,13 +73,13 @@
73 73  
74 74  **Expert configuration:** Expert method only! In this text area you can paste your desired config-file contents that should be applied to the screen configuration of this Thin Client.
75 75  
76 -==== Projection ====
76 +Projection
77 77  
78 78  **Projector:** Automatic & Custom method When holding a presentation, this setting is meant to clarify on which device the presentation is being held. This way, when you are mirroring your desktop onto the presentation device, the screen settings will be optimized for the latter. By default, the screen settings would be optimized for the primary screen.
79 79  
80 80  **Laptop monitor:** When mirroring your desktop from a laptop, you can use the setting Laptop monitor to determine which screen belongs to the laptop. Used in combination with the Disable laptop monitor option of the setting When closing the laptop lid this helps determine the correct monitor to be switched off. Default setting is Primary monitor.
81 81  
82 -**When closing the laptop lid:** If you are mirroring your desktop from a laptop, you can use this setting, in conjunction with the setting Laptop monitor to determine the default behavior that occurs when the laptop lid is being closed. The following options are available:
82 +When closing the laptop lid: If you are mirroring your desktop from a laptop, you can use this setting, in conjunction with the setting Laptop monitor to determine the default behavior that occurs when the laptop lid is being closed. The following options are available:
83 83  
84 84  * Do nothing
85 85  * Disable laptop monitor
... ... @@ -89,7 +89,7 @@
89 89  
90 90  **Monitor standby mode:** allows you to determine how much time has to pass without any input until the connected screens enter the standby mode. If this is set to Off standby mode will be disabled. Default setting is Off.
91 91  
92 -==== Advanced Settings ====
92 +Advanced Settings
93 93  
94 94  **Open X-TCP port:** opens port 177 for the X Display Manager Control Protocol (XDMCP), which is used for remote logins to an X Display Manager server. Disabled by default.
95 95  
... ... @@ -116,9 +116,9 @@
116 116  
117 117  **Test these settings:** Clicking on the Test button allows you to test your screen configuration, before applying them and thus needing to restart the Thin Client. After a few seconds the screen will revert to its previous configuration, if you do not confirm the screen settings in the corresponding dialog. This means that even when your configuration might cause display problems, this way you can still see if it works.
118 118  
119 -==== Miscellaneous ====
119 +Miscellaneous
120 120  
121 -**Ignore TCMS settings:** If you want this Thin Client to ignore the TCMS settings regarding the screen configuration you can enable this setting. TCMS settings can be found under [[Remote Administration -> TCMS Settings>>doc:Handbuecher.10\.00.Admin Guide 10\.00.Kapitel 3 - Administration des Clients.3\.E\. Remote Administration.3\.E\.C\. TCMS Einstellungen]]. Disabled by default.
121 +**Ignore TCMS settings:** If you want this Thin Client to ignore the TCMS settings regarding the screen configuration you can enable this setting. TCMS settings can be found under Remote Administration -> TCMS Settings. Disabled by default.
122 122  
123 123  
124 -{{lightbox image="bildschrim.PNG"/}}
124 +[[image:bildschrim.PNG||alt="image2020-4-22_13-6-58.png"]]