Skip to Content
Last modified by rangee rangee on 2021/10/01 11:23
Show last authors
1 This how-to describes the different options for deploying a Windows 10 IoT image to a client device.
2
3 = 1. Create Installation USB-Flash =
4
5 Prerequisites:
6
7 You need
8
9 - USB-Stick (min. 500 MB)
10
11 - Windows 10 desktop or Windows 11 desktop
12
13 The files:
14
15 - Windows Flasher - Recovery Media Creation Tool
16
17 - Windows IoT Image which fits to your device: „devicename_b~#~##.wim“ (WIM file)
18
19 The files can be downloaded from Rangee Updateserver. If you do not have the Updateserver Access, please contact Support by E-mail: support@rangee.com
20
21 ~1. Create a Recovery USB Flash
22
23 Plug the USB Flash to your windows desktop
24
25 Execute the Windows Flasher - Recovery Media Creation Tool on a standard windows desktop. (Run as administrator)
26
27 {{lightbox image="flasher1.png" group="1"/}}
28
29 In USB-Drives (red box) select your USB flash (If it's not displayed, please click „Refresh“)
30
31 Choose a „Mode“ (yellow box)
32
33 Create Recovery Medium with 2nd data partition (recommended)
34
35 Start creates a bootable USB Flash with the Rangee Recovery Console
36
37 You can see the progress at „Current state“(green box)
38
39 After the proces has finished, copy the Windows-Image (WIM file) to the Image directory
40
41
42
43 Option (NOT recommended)
44
45 1. Create Recovery Medium:
46 11. Start creates a bootable USB Flash with the Rangee Recovery Console
47 11. The Windows-Image (WIM file) must be stored on a second USB-flash or network drive
48
49 = 2. Execute Rangee Recovery Console =
50
51 == Recovery option on Windows 10 IoT thin client ==
52
53 If you want to deploy the image with an USB-Stick, it has to be NTFS formatted and at least 8GB capacity.
54
55 1. Download the Windows 10 IoT image which fits to your device: „devicename_b~#~##.wim“ (approx. 6GB)
56 1. Copy the image on a USB-Stick or a network drive
57 1. Start the device and push the „Arrow down key“ until the windows bootloader appear:
58 1. Choose „Rangee Recovery Console“{{lightbox image="flasher2.png" group="1" height="250"/}}
59 1. Wait until the „Rangee Recovery Console“ is loaded and continue with „Rangee Recovery Console“ .
60
61 == Recovery option from Installation USB Flash ==
62
63 Plug the USb flash to your thin client. The  thin client should have at least 4 GB RAM and 120 GB Flash.
64
65 Boot the device from USB Flash
66
67 == 2.1 Install new IOT Image ==
68
69 The Rangee Recovery tool will boot a windows Desktop with some applications:
70
71 (% style="width:574px" %)
72 |=(% style="width: 110px;" %)(((
73 {{lightbox image="flasher 3.png" group="1"/}}
74 )))|=(% style="width: 460px;" %)(((
75 __**Command Promt:**__
76 Open a CMD
77
78
79
80 __**Notepad:**__
81 Open a text editor
82
83
84
85 __**Reboot:**__
86 Restart the system
87
88
89
90 __**Regedit:**__
91 Open the registry editor
92
93
94
95 __**Shutdown:**__
96 Shutdown the device
97
98
99
100 **__Task-Manager:__**
101 Shows all active tasks
102
103
104 __**Windows Flasher:**__
105 Recovery of a Windows image see „Windows Flasher“
106 )))
107
108 **Start Windows Flasher**
109
110
111 At the first start you'll see the following
112
113 {{lightbox image="flasher 4.png" group="1"/}}
114
115 === Choose the WIM file ===
116
117 If the WIM file is stored on Installation USB flash please choose the WIM file fom Image directory.
118
119 If you store the image on a second USB-flash, plug in the USb Flash and select the right device/path.
120
121 If you store the image on a network drive, use „Networkdrive" -> Connect Drive“:
122
123
124 {{lightbox image="flasher 5.png" group="1"/}}
125
126
127 1. Choose a drive letter
128 1. Put in the complete UNC path to the share
129 1. If nessecary put in the username and password
130 1. The hook „Autoconnect“ persists the networkshare and autoconnect it on the next boot from this USB-Stick.
131 1. You can finally connect the drive by clicking "Connect"
132
133 === The installation ===
134
135 Use the following attributes:
136
137 (% style="width:849px" %)
138 |(% style="width:156px" %)Parameter|(% style="width:283px" %)Wert|(% style="width:407px" %)Bedeutung
139 |(% style="width:156px" %)Target|(% style="width:283px" %)# Disk ~#~#GB|(% style="width:407px" %)Choose the target drive
140 |(% style="width:156px" %)Image|(% style="width:283px" %)#devicename_b~#~##.wim“#|(% style="width:407px" %)Choose the downloaded WIM file
141 |(% style="width:156px" %)Start|(% style="width:283px" %) |(% style="width:407px" %)Start the installation
142
143 == 2.2 Capturing a Windows image ==
144
145 You can capture an Image by using the „Capture“ function. This captured images can be deployed on other devices. Please run "sysprep" before capturing an image.
146
147 (https:~/~/docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/sysprep~-~-generalize~-~-a-windows-installation)
148
149
150 {{lightbox image="flasher 6.png" group="1"/}}
151
152
153 |Parameter|Wert|Bedeutung
154 |Image|X:\path\Name.wim   |Insert the path in which the captured image should be saved
155
156 === Logging ===
157
158 The Log can be views by clicking „File -> Open last Log File“