Skip to Content
Last modified by Ulrich Mertz on 2023/11/15 11:41
From version 6.1
edited by rangee rangee
on 2021/09/23 13:58
Change comment: There is no comment for this version
To version 15.1
edited by Ulrich Mertz
on 2023/11/15 11:41
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.rangee
1 +XWiki.UlrichMertz
Content
... ... @@ -1,72 +1,102 @@
1 1  This how-to describes the different options for deploying a Windows 10 IoT image to a client device.
2 2  
3 -= Installtion – Recovery from USB-Stick =
3 += 1. Create Installation USB-Flash =
4 4  
5 - For the following manual you need a USB-Stick (min. 500 MB). If you want to deploy the Image on the same USB-Stick you need at least 8GB capacity. Download the following files:
5 +Prerequisites:
6 6  
7 -1. The Rangee „Windows Flasher - Recovery Media Creation Tool“#
8 -1. The Windows 10 IoT Image which fits to your device: „devicename_b~#~##.wim“ (approx. 6GB)
7 +You need
9 9  
10 -Continue as follows:
9 +- USB-Stick (min. 500 MB)
11 11  
12 -[[image:flasher1.png]]
11 +- Windows 10 desktop or Windows 11 desktop
13 13  
14 -1. Plug in the USB-Stick into your PC
15 -1. Open the „Windows Flasher - Recovery Media Creation Tool“ (Run as administrator)
16 -1. Choose the USB-Stick under „USB Drives“ (If it's not displayed, please click „Refresh“) / marked red
17 -1. Choose a „Mode“ / marked yellow
18 -11. Create Recovery Medium:
19 -111. Rangee Recovery Console (The Windows-Image must eb deployed from a second USB-Stick or from a network drive
20 -11. Create Recovery Medium with 2nd data partition (W10 only)
21 -111. Create a medium only with the Rangee Recovery Console and a second partition for the Windows-Image
22 -111. This option can onlys be used if the „Recovery Media Creation Tool“ is runinng on Windows 10
23 -11. Erase USB Drive (Clean)
24 -111. Deletes all Partitionen (incl. data) from the medium
13 +The files:
25 25  
26 -1. Press „Start“ / marked Blue
27 -1. You can see the progress at „Current state“ / marked green
28 -1. Copy the Image to the USB-Stick (Partition „Image“), an other USB-Stick whihc is NTFS formatted or a networkdrive.
29 -1. Continue with  „Rangee Recovery Console“
30 -1.
15 +- Windows Flasher - Recovery Media Creation Tool
31 31  
32 -= Recovery from an existing Windows 10 IoT installation =
17 +- Windows IoT Image which fits to your device: „devicename_b~#~##.wim“ (WIM file)
33 33  
19 +The files can be downloaded from Rangee Updateserver. If you do not have the Updateserver Access, please contact Support by E-mail: support@rangee.com
20 +
21 +~1. Create a Recovery USB Flash
22 +
23 +Plug the USB Flash to your windows desktop
24 +
25 +Execute the Windows Flasher - Recovery Media Creation Tool on a standard windows desktop. (Run as administrator)
26 +
27 +{{lightbox image="flasher1.png" group="1"/}}
28 +
29 +In USB-Drives (red box) select your USB flash (If it's not displayed, please click „Refresh“)
30 +
31 +Choose a „Mode“ (yellow box)
32 +
33 +Create Recovery Medium with 2nd data partition (recommended)
34 +
35 +Start creates a bootable USB Flash with the Rangee Recovery Console
36 +
37 +You can see the progress at „Current state“(green box)
38 +
39 +After the proces has finished, copy the Windows-Image (WIM file) to the Image directory
40 +
41 +
42 +
43 +Option (NOT recommended)
44 +
45 +1. Create Recovery Medium:
46 +11. Start creates a bootable USB Flash with the Rangee Recovery Console
47 +11. The Windows-Image (WIM file) must be stored on a second USB-flash or network drive
48 +
49 += 2. Execute Rangee Recovery Console =
50 +
51 +== Recovery option on Windows 10 IoT thin client ==
52 +
34 34  If you want to deploy the image with an USB-Stick, it has to be NTFS formatted and at least 8GB capacity.
35 35  
36 36  1. Download the Windows 10 IoT image which fits to your device: „devicename_b~#~##.wim“ (approx. 6GB)
37 37  1. Copy the image on a USB-Stick or a network drive
38 38  1. Start the device and push the „Arrow down key“ until the windows bootloader appear:
39 -1. Choose „Rangee Recovery Console“
40 -[[image:https://rangee.com/knowledgebase/download/attachments/10780681/flasher2.png?version=1&modificationDate=1581579843000&api=v2||height="250"]]
58 +1. Choose „Rangee Recovery Console“{{lightbox image="flasher2.png" group="1" height="250"/}}
41 41  1. Wait until the „Rangee Recovery Console“ is loaded and continue with „Rangee Recovery Console“ .
42 42  
43 -= Rangee Recovery Console =
61 +== Recovery option from Installation USB Flash ==
44 44  
45 -== Programs in the Recovery Console ==
63 +Plug the USb flash to your thin client. The  thin client should have at least 4 GB RAM and 120 GB Flash.
46 46  
47 -In der Console angekommen, bieten sich Ihnen einige Programme, die Sie zu Diagnose- und Reparaturzwecken verwenden können:
65 +Boot the device from USB Flash
48 48  
49 -|=(% style="width: 211px;" %)(((
67 +== 2.1 Install new IOT Image ==
68 +
69 +The Rangee Recovery tool will boot a windows Desktop with some applications:
70 +
71 +(% style="width:574px" %)
72 +|=(% style="width: 110px;" %)(((
73 +{{lightbox image="flasher 3.png" group="1"/}}
74 +)))|=(% style="width: 460px;" %)(((
50 50  __**Command Promt:**__
51 51  Open a CMD
52 52  
53 53  
79 +
54 54  __**Notepad:**__
55 55  Open a text editor
56 56  
57 57  
84 +
58 58  __**Reboot:**__
59 59  Restart the system
60 60  
61 61  
89 +
62 62  __**Regedit:**__
63 63  Open the registry editor
64 64  
65 65  
94 +
66 66  __**Shutdown:**__
67 67  Shutdown the device
68 68  
69 69  
99 +
70 70  **__Task-Manager:__**
71 71  Shows all active tasks
72 72  
... ... @@ -73,26 +73,27 @@
73 73  
74 74  __**Windows Flasher:**__
75 75  Recovery of a Windows image see „Windows Flasher“
76 -)))|=(% style="width: 1811px;" %)(((
77 -[[image:flasher 3.png]]
78 78  )))
79 79  
80 -**Windows Flasher**
108 +**Start Windows Flasher**
81 81  
82 82  
83 83  At the first start you'll see the following
84 84  
85 -[[image:flasher 4.png]]
113 +{{lightbox image="flasher 4.png" group="1"/}}
86 86  
87 -=== Deploy an Image ===
115 +=== Choose the WIM file ===
88 88  
89 -If you want to use an USB-Stick please be sure the USB-Stick is connected to the System.
90 -If you want to use a network drive use „Networkdrive -> Connect Drive“:
117 +If the WIM file is stored on Installation USB flash please choose the WIM file fom Image directory.
91 91  
119 +If you store the image on a second USB-flash, plug in the USb Flash and select the right device/path.
92 92  
93 -[[image:flasher 5.png]]
121 +If you store the image on a network drive, use „Networkdrive" -> Connect Drive“:
94 94  
95 95  
124 +{{lightbox image="flasher 5.png" group="1"/}}
125 +
126 +
96 96  1. Choose a drive letter
97 97  1. Put in the complete UNC path to the share
98 98  1. If nessecary put in the username and password
... ... @@ -105,18 +105,18 @@
105 105  
106 106  (% style="width:849px" %)
107 107  |(% style="width:156px" %)Parameter|(% style="width:283px" %)Wert|(% style="width:407px" %)Bedeutung
108 -|(% style="width:156px" %)Target|(% style="width:283px" %)# Disk ~#~#GB|(% style="width:407px" %)Choose the Drive on wich Windows 10 should be installed
109 -|(% style="width:156px" %)Image|(% style="width:283px" %)#Pfad zur „Gerätename_b~#~##.wim“#|(% style="width:407px" %)Choose the downloaded Windows 10 Image
139 +|(% style="width:156px" %)Target|(% style="width:283px" %)# Disk ~#~#GB|(% style="width:407px" %)Choose the target drive
140 +|(% style="width:156px" %)Image|(% style="width:283px" %)#devicename_b~#~##.wim“#|(% style="width:407px" %)Choose the downloaded WIM file
110 110  |(% style="width:156px" %)Start|(% style="width:283px" %) |(% style="width:407px" %)Start the installation
111 111  
112 -=== Capturing a Windows image ===
143 +== 2.2 Capturing a Windows image ==
113 113  
114 -You can capture an Image by using the „Capture“ function. This captured images can be deployed on other devices. Pleas run "sysprep" before capturing an image.
145 +You can capture an Image by using the „Capture“ function. This captured images can be deployed on other devices. Please run "sysprep" before capturing an image.
115 115  
116 116  (https:~/~/docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/sysprep~-~-generalize~-~-a-windows-installation)
117 117  
118 118  
119 -[[image:flasher 6.png]]
150 +{{lightbox image="flasher 6.png" group="1"/}}
120 120  
121 121  
122 122  |Parameter|Wert|Bedeutung