Wiki source code of TCMS (RangeeOS) - Bereitstellung als virtuelle Maschine (VM)
Last modified by Tobias Wintrich on 2024/04/16 10:38
Show last authors
author | version | line-number | content |
---|---|---|---|
1 | This HowTo describes how to install RangeeOS in a virtual environment as a VM. | ||
2 | |||
3 | **Estimated time required:** Approximately 10 minutes after downloading the image. | ||
4 | |||
5 | {{toc/}} | ||
6 | |||
7 | = Step 1 - Downloading the ISO image = | ||
8 | |||
9 | The ISO file for installing RangeeOS or TCMS is available upon request from Rangee Support - please send an inquiry to support@rangee.com. | ||
10 | |||
11 | In order for us to provide you with a customized download link for the appropriate ISO file, please include the following minimum information in the email: | ||
12 | |||
13 | * Your company name | ||
14 | * For TCMS, additional information on where you purchased your device with RangeeOS | ||
15 | |||
16 | = Step 2 - Provisioning the ISO file = | ||
17 | |||
18 | For installation on VMware vSphere, Microsoft Hyper-V, or Proxmox VE, you can find instructions for creating the virtual machine here: | ||
19 | |||
20 | * [[TCMS - Installation auf ESXi>>doc:HowTos.TCMS - Installation auf VMware vSphere.WebHome]] | ||
21 | * [[TCMS - Installation auf Hyper-V>>doc:HowTos.TCMS - Installation auf Hyper-V.WebHome]] | ||
22 | * [[TCMS - Installation auf Proxmox VE>>doc:HowTos.TCMS - Installation auf Proxmox VE.WebHome]] | ||
23 | |||
24 | Installation is also supported on almost all other hypervisors. The VM requires the following minimum requirements: | ||
25 | |||
26 | * Min. 2 vCPU | ||
27 | * Min. 4GB RAM | ||
28 | * HDD: | ||
29 | ** SATA or IDE disk mode | ||
30 | ** (RangeeOS) min. 8GB HDD, 32GB if Fastboot is to be used | ||
31 | ** (TCMS) Min. 8GB HDD, 32GB recommended | ||
32 | |||
33 | If you want to install RangeeOS / TCMS on hardware, you can transfer the ISO file to a USB stick using tools such as Rufus, Unetbooting, or similar. See more about this here: | ||
34 | [[RangeeOS - Installation von einem USB-Stick>>doc:HowTos.USB-Installer.WebHome]] | ||
35 | |||
36 | = Step 3 – Installation = | ||
37 | |||
38 | 1. Boot from the ISO file and select the '**RangeeOS Installer**'((( | ||
39 | ((( | ||
40 | ((( | ||
41 | {{lightbox image="image2021-4-30_8-25-54.png" width="500" group="1"/}} | ||
42 | ))) | ||
43 | ))) | ||
44 | ))) | ||
45 | 1. Select '**Install RangeeOS**' and confirm the proposed disk (usually /dev/sda) for installation.((( | ||
46 | (% style="width:1060px" %) | ||
47 | |(% style="width:523px" %){{lightbox image="image2021-4-30_8-27-50.png" width="500" group="1"/}}|(% style="width:533px" %){{lightbox image="image2021-4-30_8-28-14.png" width="500" group="1"/}} | ||
48 | ))) | ||
49 | 1. Wait until the installation is complete. Text characters appearing during the installation process can be ignored.((( | ||
50 | (% style="width:1061px" %) | ||
51 | |(% style="width:529px" %){{lightbox image="image2021-4-30_8-29-19.png" width="500" group="1"/}}|(% style="width:529px" %){{lightbox image="image2021-4-30_8-30-13.png" width="500" group="1"/}} | ||
52 | ))) | ||
53 | 1. Finally, select 'Reboot' and confirm that the CD-ROM drive has been ejected.((( | ||
54 | (% style="width:1046px" %) | ||
55 | |(% style="width:517px" %){{lightbox image="image2021-4-30_8-31-12.png" width="500" group="1"/}}|(% style="width:526px" %){{lightbox image="image2021-4-30_8-31-30.png" width="500" group="1"/}} | ||
56 | ))) | ||
57 | 1. The VM will then start into a "**Pre Setup Wizard**".{{lightbox image="image2021-4-30_8-32-42.png" width="500" group="1"/}} | ||
58 | |||
59 | = Step 4 – Pre Setup Wizard = | ||
60 | |||
61 | Upon the first boot of a newly installed RangeeOS (also TCMS), various device data will be requested: | ||
62 | |||
63 | * Unit Type | ||
64 | * Serial number | ||
65 | |||
66 | These data can be freely chosen and do not have any license-related background. They can be read later via the TCMS Kommbox. | ||
67 | |||
68 | After entering the data, TCMS automatically attempts to retrieve a license and then shuts down automatically. The installation is now complete. | ||
69 | |||
70 | (% style="width:1550px" %) | ||
71 | |(% style="width:528px" %){{lightbox image="image2021-4-30_8-39-31.png" width="500" group="1"/}}|(% style="width:521px" %){{lightbox image="image2021-4-30_8-39-51.png" width="500" group="1"/}}|(% style="width:500px" %){{lightbox image="image2021-4-30_8-40-25.png" width="500" group="1"/}} | ||
72 | |||
73 | = Step 5 - Next Steps = | ||
74 | |||
75 | All further details regarding the use of RangeeOS can be found in our [[RangeeOS Manual>>doc:Handbuecher.Handbuch11.WebHome]]. | ||
76 | |||
77 | All further details regarding the use of TCMS can be found in our [[TCMS Manual>>doc:Handbuecher.TCMS11\.00.WebHome]]. | ||
78 | |||
79 | = Note = | ||
80 | |||
81 | The entire management interface of RangeeOS as well as TCMS is web-based and can be accessed with any browser. | ||
82 | |||
83 | Simply open the page '**https:~/~/%IP or hostname of the OS%**' for Kommbox or '**https:~/~/%IP or hostname of the OS%/tcms**' for TCMS. |